Home
Design Center
rocket_launch
Design center home
arrow_forward
An overview of the design center
auto_stories
Design guide
arrow_forward
Best practices for manufacturing
build_circle
Hardware library
arrow_forward
Embedded solutions to microfluidic design challenges
straighten
core formats
arrow_forward
Device templates optimized for speed
computer
FLOW CELL DESIGNER
arrow_forward
No engineering required
Resources
3d_rotation
knowledge base
arrow_forward
Expert articles and webinars
event
Conference calendar
arrow_forward
Upcoming trade shows and events
flare
What's new
arrow_forward
Technology and product updates
about
careers
Contact
drag_handle
close
hardware library
MV-1 Embedded Microvalve
The MV-1 is an embedded on/off valve used to automate microfluidic functions such as priming, mixing, and timing of fluidic events.
1/4-28 Port
A flat-bottom threaded port designed to mate with standard 1/4-28 capillary tube fittings. Low dead volume and high pressure tolerance.
Luer Port
A conical port designed to mate with standard male luer fittings. A great choice for applications that require soft tubing or lower pressures.
250 Microliter Reservoir
A conical bottom sample reservoir for gravity driven flow or interfacing with an external manifold. Sized to fit within spacing standards for 96 well microplates.
Slide adapter
Convert your device into an assembly that matches the SLAS microplate standard to take advantage of existing lab instrumentation. Reusable anodized aluminum adapters make it easy to set up and image your experiments.
Double slide adapter
Convert your double slide format device into an assembly that matches the SLAS standard to take advantage of existing lab instrumentation Reusable anodized aluminum adapters make it easy to set up and image your experiments.
Microplate adapter
Convert your microplate format device into an assembly that matches the SLAS standard to take advantage of existing lab instrumentation. Reusable anodized aluminum adapters make it easy to set up and image your experiments.